Processing method

Huayuan panel is very easy to process.All cutting,milling, slotting,side-folding and curving can be easily fulfilled by simple tools used for processing timber and metal.It can be shaped into various shapes,such as curve,reserve curve, curve comer and sharp curve,according to requirements of building design.It is incomparalbe for other decorating materials.
Normal aluminum product processing machinery and wood product processing machinery can be used for processing of Huayuan panel without special device. 

Saw cutting

It can be easily processed with wood product processing saw and plate saw.It's recommended to use hard alloy blade 

Slotting

It's important to make the U type slotting process with a distance for 0.2-0.4mm from the polyethylene substrate.
The recommended slot angle is 110
(1)milling machine and trimmer
Use the modified drill
Running speed: 20000-30000rpm
Feed speed: 3-5m/min
Materal: hard alloy
(2)When processing large quantity of U type slots,
it's recommended to use round saw and belt saw.And the following is an example of slotter
material:hard alloy flake
outer diameter: 305mm
number of teeth: 24
running speed: 3000-5000rpm 

Bending with panel folder

If operated on the platform,bending part can be made very tidy.Platen puncher,plate folder or bending dies are applied as bending equipment.The recommended temperature for bending is over 10℃.

Bending with panel bender

When plate folder is used to finish the HuaYuan panel,dies shall be placed on with appropriate radius. 

Bending with 3-roller panel bender

3-roller panel bender is more preferable for
bending of large intemal diameler to plate
folder,beforethe bending,it shall ensure that it
can be manually bent after bending.

Riveting

Countersunk rivet can realize easy joint from onedirection

Bolting

Considering from deformation
limit,formul e>2D is the best calculation way
of aperture D anddistance from hole center to
plate
end.